Do you know how long your mountain bike disc brake pads should last? If not, you’re not alone.
A lot of riders don’t really think about it until their brake pads are completely worn down and they’re stuck on the side of the road or trail.
In this post, we’ll talk about how to tell when your brake pads need to be replaced, as well as how long they should last in general.
By the end, you’ll have a good idea of when it’s time for a pad change!
Depending on a variety of factors, most riders will get between 500 and 1250 miles from a set of disc brake pads. Resin pads tend to wear out faster than sintered metal pads, but they are also much cheaper to replace.
Ultimately, how long your brake pads last will depend on your riding style, the terrain you ride on and the type of pad you choose.
By being mindful of these factors, you can help to extend the life of your disc brake pads and keep your bike running smoothly.
Why should you change MTB disc brake pads?
There are a few reasons why you really should change your disc brake pads.
Decrease braking power
One of the most obvious reasons is that as your pads wear down, they will start to lose braking power. This can be dangerous, especially if you’re riding on technical terrain or at high speeds.
You may not notice the loss of power at first, but over time it will become more and more difficult to stop your bike. If you find yourself having to pull the lever harder and harder to get the same stopping power, it’s time for new pads.
Increase the chance of a crash
Safety is always the number one priority when riding, and worn-out brake pads can increase the chance of a crash. If your pads are completely worn down, you may not be able to stop in time to avoid an obstacle or another rider.
Even if you’re a careful rider, it’s always better to err on the side of caution and replace your pads before they get too worn.
Can cause damage to your rotors
No one wants to damage their disc brakes, but it can happen if you let your pads wear down too much. When your pads are worn, they will start to the metal on metal contact with your rotors.
This can cause damage to both your pads and rotors and is something you definitely want to avoid. If you hear a squealing noise when you brake, it’s a good indication that your pads are worn and you need to replace them.
Worn brake pads can reduce the life of your bike’s brakes
Having to replace your pads more often than necessary can add up, both in terms of money and time.
If you take good care of your brakes and replace your pads when needed, you’ll be able to extend the life of your brake system.
This is not only good for your wallet but also for the environment, as it takes fewer resources to maintain something than it does to replace it.
Why don’t people like changing MTB disc brakes?
A lot of people don’t like changing their disc brakes because of a few reasons.
It can be a hassle to change them
Having to deal with taking your wheels off and then changing the pads can be a pain, especially if you’re not used to it. It’s definitely not the most fun part of riding, but it’s something that needs to be done from time to time.
This means that you either need to be comfortable changing your own pads or you’ll need to take it to a shop and pay someone to do it for you.
They can be expensive to replace
We all try by all means to stay away from unplanned expenses, and replacing your brake pads can be one of them.
Depending on the type of pad you choose and how often you ride, you may find yourself changing them more often than you’d like.
It’s difficult to know when they need to be replaced
When it comes to knowing when to replace your disc brake pads, it’s not always easy to tell. Unlike with other bike parts, you can’t just look at your pads and know if they need to be replaced.
This is because the amount of wear will depend on a number of factors, such as your riding style and the terrain you ride on. The best way to know for sure is to inspect them regularly and replace them when they start to show signs of wear.
They can wear out quickly if not taken care of properly
Another reason why people don’t like changing their disc brakes is that they can wear out quickly if you’re not careful. If you ride in wet or muddy conditions, your pads will wear down faster.
The same goes for riding on sandy or dusty trails. If you don’t clean your bike after these rides, the particles will cause your pads to wear down quicker.
How often should you change the disc brakes bike?
The frequency with which you need to replace your bicycle disc brakes will depend on how often you ride and the conditions in which you ride.
On average, a bike’s disc rotor can last for two years before it needs to be replaced. However, if you ride more frequently or in harsher conditions, you may need to replace your rotors more frequently.
When inspecting your rotors, pay attention to the thickness of the metal. Rotors should be replaced when they get to a thickness of 1.5mm or less. This will ensure that your brakes are effective and help prevent damage to your bike.
How much are new brakes on a mountain bike?
The cost of new brakes will vary depending on the type of bike you have and whether you do the work yourself or take it to a professional.
On average, you can expect to pay $80.00-$150.00 for a full replacement of front and rear brake systems at a professional shop. If you have a non-standard bike frame, the cost may be even higher.
However, replacing your own brakes is generally a relatively simple and inexpensive task. Whether you choose to do it yourself or take your bike to a professional, be sure to keep an eye on your brakes so that you can stay safe on the trails.
My final thoughts.
In conclusion, Depending on a variety of factors, most riders will get between 500 and 1250 miles from a set of disc brake pads.
To get the most life out of your disc brakes, it’s important to keep them clean and free of debris. Inspect them regularly and replace them when they start to show signs of wear.
Be sure to also pay attention to the condition of your rotors. Rotors should be replaced when they get to a thickness of 1.